Wednesday, August 18, 2010
Internet speeds in Ubuntu can be increased. Simply follow the steps.
- Open a Terminal via Applications->Accessories->Terminal and type the following
sudo vim /etc/sysctl.conf (press i for edit mode)
- Then Paste the Following at the end of the file:
## increase TCP max buffer size setable using setsockopt() net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 ## increase Linux autotuning TCP buffer limits ## min, default, and max number of bytes to use ## set max to at least 4MB, or higher if you use very high BDP paths net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 ## don't cache ssthresh from previous connection net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_moderate_rcvbuf = 1 ## recommended to increase this for 1000 BT or higher net.core.netdev_max_backlog = 2500 ## for 10 GigE, use this, uncomment below ## net.core.netdev_max_backlog = 30000 ## Turn off timestamps if you're on a gigabit or very busy network ## Having it off is one less thing the IP stack needs to work on ## net.ipv4.tcp_timestamps = 0 ## disable tcp selective acknowledgements. net.ipv4.tcp_sack = 0 ##enable window scaling net.ipv4.tcp_window_scaling = 1
- Then type the follwing to exit and save what you have just done. Press ESC to quit the edit mode and type the following.
- Then type the following to to apply the settings.
sudo sysctl -p
- You can disable all these settings by removing these lines you added via:
sudo gedit /etc/sysctl.conf Courtesy: ubuntumanual.org
A DNS server resolves domain names into IP addresses. So when you request “google.com” for example, the DNS server finds out the address for the domain, and sends your request the right way.
You can run a DNS cache on your computer. This will speed up the process of looking up domain names when browsing. The difference is about 30-60 ms for me. Multiply that difference by the number of websites you visit a day for an approximate estimate of the speed improvement. Of course, all this would be worth it if it weren’t for the fact that setting this up is way too easy.
The following instructions are for someone with a cable (broadband) internet connection, where the computer gets it’s local IP address using DHCP from the router in your house/office:
The package we will be using for caching nameserver lookups is called dnsmasq. So first, install it using:
$sudo apt-get install dnsmasq
(If you can’t find then, then you probably haven’t added the Universe repository to your list of repositories.)
No uncomment the following line (that is edit the line to NOT have a “#” in the beginning) in the file
/etc/dhcp3/dhclient.conf and make sure the section below exactly like this, especially the line that says “prepend domain-name-servers 127.0.0.1;”
#supersede domain-name "fugue.com home.vix.com";
prepend domain-name-servers 127.0.0.1;
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, host-name,
Explanation for the above change: In the normal case, when you get a new dhcp lease, the dhcp3 client (tool) on your computer gets a new lease, and updates the
/etc/resolv.conf file on your computer with the right values for the DNS servers to use (usually some machine in the network of your hosting provider). Adding the “prepend” option as we did above ensures that “127.0.0.1″ will appear on the top of the list of DNS servers. That magic number refers to your own computer. So in the future, whenever your computer needs to resolve a domain name, it will forward that request to dnsmasq (which is running at 127.0.0.1 – your computer). If the details for the domain name are already in you cache, well and good, dnsmasq will serve it up and make the process real fast. If it is not in the cache, then dnsmasq will look at the /etc/resolv.conf file and use the nameservers listed below the “127.0.0.1″. I hope that explains things.
Now open the file
/etc/resolv.conf in your text editor. It probably looks like:
The 127.0.0.1 is missing right now since you haven’t renewed your lease after you edited the /etc/dhcp3/dhclient.conf file. So, let us add that in manually this one time. After you do, your /etc/resolv.conf file will look like the following:
Don’t worry if the numbers are different – if they are not, then hey – we must be neighbours
Okay. We are almost done here. All we have to do now is to restart dnsmasq so that the changes we made to the configuration file take effect. You can do that using the command:
$sudo /etc/init.d/dnsmasq restart.
Now you are running a local DNS cache. If you want to measure your speed improvement, type the command:
You will see something like “;; Query time: 38 msec” there.
Now type the command again, and you should see something like:”;; Query time: 2 msec”
See, the first time, since google.com’s details were not in your cache (you are using it for the first time), the query took 38 ms. The second time, the cache speeds up the lookup. I have been using this for over a month now, and haven’t had a problem.
source : embraceubuntu.com